SPULEN | FRONT SUBFRAME LOCKING COLLAR KIT FOR VW/AUDI
Spulen Front Subframe Locking Collar Kit For VW/Audi
Eliminate subframe clunk or shifts with the Spulen Front Subframe locking collar kit. A common issue that occurs on most applicable VW/Audi is that the subframe shifts when taking turns or going over uneven ground, causing dislocation or a twist in the chassis, which leads the subframe bolts to touch and scrape against the sidewalls of the subframe. This leads to clunking or grinding noises coming from underneath your car, which only get worse with time. The constant shift in the dead space between subframe and the bolts also leads to improper body roll, which can affect your cornering performance. We've developed this kit to eliminate any play between the subframe and the collar bolts, which leads to a quiet, stiffer, better performing subframe.
- Please note the bolts used in this kit are stretch bolts. Therefore, when installing, you must meet the torque spec below, then turn the wrench an additional degree listed.
Lower Subframe Bolts: 70Nm (51 Ft-lbs) + 90 degrees (Stretch Bolts)
Included In This Kit:
(2) Rear Lower Subframe Locking Collars
(2) Rear Upper Subframe Collars
(2) Control Arm Bushing Locking Collars
(2) Control Arm Bushing Upper Collars
(4) Upper Subframe Collars
(2) OEM Factory Stretch Bolts (For the rear lower subframe locking collars)
Audi A3 (8P)
Audi TT MK2
Audi TTS MK2
Audi TTRS MK2
Volkswagen Golf R (Mk6)
Volkswagen Golf/GTI/Rabbit (MK5/MK6)
Volkswagen Passat (B6)
Volkswagen Tiguan (Pre-2018)
Additional (4) Subframe Bolts are also recommended to be replaced as they are stretch, one time use. Available below as a set of 4.
(4) OEM Bolts for Subframe - N91039802